Accessories for Fasteners

Tester for proof loading and determination of pullout resistance of anchors and DX fasteners

Accessories for injectable mortars, including piston plugs and extension hoses

Injectable mortar accessories for blowing out

Injectable mortar accessories for blowing out

Extension hose to be used together with the HIT-SZ piston plug for injectable hybrid/epoxy mortal

Extension hose to be used together with the HIT-SZ piston plug for injectable hybrid/epoxy mortal

Mixers and extensions for injectable mortars

Setting tool (HSC)

Setting tool for short HKD anchors with an integrated SDS Plus (TE-C) stop hammer drill bit

Setting tool for long HKD anchors with an integrated SDS Plus (TE-C) stop hammer drill bit

Setting tool – required for installation of HDA undercut anchors

Undercut tool – for creating the undercut for HDA anchors where rebars are hit

Setting tool for driving compatible expansion anchors into concrete

Setting tool for internally threaded sleeves

Disassembly tool – for easy removal of HDA undercut anchors

Setting adapter for capsule anchor rods with hexagon heads

Setting tool – required for installation of HSU-R stone undercut anchors

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

SDS-plus (TE-C) setting tool for drop-in anchors

Setting tool

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

Roughening tool for diamond-cored holes in concrete

Inspection card S-IC BT for S-BT threaded screw-in studs to ensure the correct screw-in depth

Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools

Anchor tester

Injectable mortar accessories for overhead applications

Injectable mortar accessories for overhead applications

Injectable mortar accessories for overhead applications

Calibration card for S-BT threaded screw-in studs to ensure the correct screw-in depth

Calibration card for S-BT threaded screw-in studs to ensure the correct screw-in depth

Insulation plug for use with S-ID screws to help prevent thermal bridging

Torque-controlled socket wrench for setting HSA anchors

Check gauge for HUS4 screw anchors

Check gauge for HUS4 screw anchors

Check gauge for HUS4 screw anchors

Check gauge for HUS4 screw anchors

Torque tool for use with new-generation X-BT threaded studs

16 Nm torque tool for installing S-BT threaded screw-in studs on steel (thickness < 6 mm)

Injectable mortar accessories for brushing and guiding