Search Results
182 Products for "expansion anchors"
Filter
ultimate
- Description
- 3/4" (inch) long impact sockets for tightening bolts and anchors
- Connection end
- 3/4 in square
- Short/long
- Long
- Product class
- Ultimate
New
ultimate
- Description
- 3/8" (inch) short impact socket for tightening bolts and anchors
- Connection end
- 3/8 in square
- Short/long
- Short
- Material coating/plating/finish
- Black phosphate
ultimate
- Description
- 1/2" (inch) short impact socket for tightening bolts and anchors
- Connection end
- 1/2 in square
- Short/long
- Short
- Material coating/plating/finish
- Black phosphate
- Description
- Hot-dip galvanised (HDG) bored plate for trapeze assembly and anchoring
- Material composition
- S235JR - DIN EN 10025
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Undercut tool – for creating the undercut for HDA anchors where rebars are hit
- Material, corrosion
- N/A
- Head configuration
- n/a
- Approvals / test reports
- N/A
- Description
- Set for filling the annular gap in mechanical and chemical anchors (carbon steel)
No technical data available
- Description
- Set for filling the annular gap in mechanical and chemical anchors (mechanical plating)
No technical data available
- Description
- Economical plastic insulation anchor for fastening hard insulating materials to concrete and masonry
- Base materials
- Masonry (solid), Masonry (hollow), Concrete (tough)
- Working principle
- Impact anchor
- Insulation material
- Mineral wool, Soft board (e.g. EPS), Hard board (e.g. XPS, PUR, PIR)
- Description
- Base connector for anchoring light-duty strut channel structures to concrete or steel
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Base connector for anchoring light-duty strut channel structures to concrete or steel
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Economical metal insulation anchor for fastening insulating materials when fire resistance is required
- Base materials
- Masonry (solid), Masonry (hollow), Concrete (tough)
- Working principle
- Impact anchor
- Insulation material
- Mineral wool, Soft board (e.g. EPS), Hard board (e.g. XPS, PUR, PIR)
- Description
- Economical universal plastic wall plugs for light-duty fastening to hollow and solid walls
- Base materials
- Concrete (aerated), Concrete (uncracked), Drywall, Masonry (hollow), Masonry (solid)
- Head configuration
- Flat head
- Approvals / test reports
- N/A
- Description
- High-performance internally threaded insert for capsule and injectable hybrid/epoxy anchors (carbon steel)
- Material, corrosion
- Carbon steel, zinc-plated
- Environmental conditions
- Dry indoor
- Base materials
- Concrete (cracked), Concrete (uncracked)
- Description
- Economical threaded rod for injectable hybrid/epoxy anchors (Grade 8.8 hot-dip galvanized)
- Material, corrosion
- Carbon steel, HDG (hot-dip galvanised)/sherardised
- Environmental conditions
- Indoor with temporary condensation, Outdoor (more than 1 km from coast)
- Base materials
- Concrete (cracked), Concrete (uncracked), Masonry (hollow), Masonry (solid)
- Description
- Galvanised medium-duty base plate to fasten metric threaded rods with two anchor points
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Set for filling the annular gap in mechanical and chemical anchors (A4 stainless steel)
No technical data available
- Description
- Economical threaded rod for injectable hybrid/epoxy anchors (A4 stainless steel), by the metre
- Material, corrosion
- Stainless steel, A4
- Environmental conditions
- Coastal areas/roads with de-icing salt, Outdoor (more than 1 km from coast), Outdoor (more than 1 km from coast), Outdoor with heavy industrial pollution
- Base materials
- Concrete (cracked), Concrete (uncracked), Masonry (hollow), Masonry (solid)
- Description
- Base connector for anchoring strut channel structures under 3D loading to concrete or steel
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Ultimate SDS Plus (TE-C) hammer drill bit for anchor drilling into reinforced concrete (metric)
- Connection end
- TE-C (SDS-plus)
- Base material
- Reinforced concrete, Concrete, Brick, Masonry
- Working mode
- Hammer drilling
- Description
- Ultimate SDS Plus (TE-C) hammer drill bit for anchor drilling into reinforced concrete (imperial)
- Connection end
- TE-C (SDS-plus)
- Base material
- Reinforced concrete, Concrete, Brick, Masonry
- Working mode
- Hammer drilling
- Description
- Kwik Cast setting tool for wood form anchors/inserts (KCM-WF, KCC-WF, KCCM-WF)
- Anchor type
- Accessories
- Head configuration
- n/a
- Material composition
- Cast-iron, Plastic
- Description
- Adjustable brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- High-performance internally threaded insert for capsule and injectable hybrid/epoxy anchors (A4 stainless steel)
- Material, corrosion
- Stainless steel, A4
- Environmental conditions
- Coastal areas/roads with de-icing salt, Outdoor (more than 1 km from coast), Outdoor (more than 1 km from coast), Outdoor with heavy industrial pollution
- Base materials
- Concrete (cracked), Concrete (uncracked)
- Description
- Economical stainless steel insulation anchor for fastening insulating materials when corrosion- and fire-resistance are required
- Base materials
- Masonry (solid), Masonry (hollow), Concrete (tough)
- Working principle
- Impact anchor
- Insulation material
- Mineral wool, Soft board (e.g. EPS), Hard board (e.g. XPS, PUR, PIR)
- Description
- Base connector for anchoring strut channel structures to concrete and steel, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring strut channel structures under 3D loading to concrete and steel or steel
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
ultimate
- Description
- Setting tool for long HKD anchors with an integrated SDS Plus (TE-C) stop hammer drill bit
- Connection end
- TE-C (SDS-plus)
- Base material
- Reinforced concrete, Concrete
- Working mode
- Hammer drilling
- Description
- 1/2" (inch) long impact socket for tightening bolts and anchors, with magnetic impact and thin wall adaptation
- Connection end
- 1/2 in square
- Short/long
- Long
- Material coating/plating/finish
- Silver, Coated
- Description
- 45-degree angle brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete
- Material composition
- Q235 or better steel
- Surface finish
- Indoor Coated - Pre-galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Premium SDS Plus (TE-C) hammer drill bit with 2-flute helix for drilling anchor holes into concrete
- Connection end
- TE-C (SDS-plus)
- Base material
- Brick, Concrete, Masonry, Natural stone, Sand-lime block
- Working mode
- Hammer drilling
New
premium
- Description
- Premium SDS Plus (TE-C) hammer drill bit with 2-flute helix for drilling anchor holes into concrete
- Connection end
- TE-C (SDS-plus)
- Base material
- Concrete, Brick, Masonry, Sand-lime block, Natural stone
- Working mode
- Hammer drilling
- Description
- Adaptive torque module to equip the SIW 6AT-A22 for anchoring and bolting in line with approvals
- Accessory type
- Adaptive torque modules
- Weight according to EPTA-Procedure 01/2003 without battery
- 0.26 kg
- Dimensions (LxWxH)
- 143 x 98 x 46 mm
- Description
- Base connector for anchoring MT-70 and MT-80 girder structures to concrete, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring light-duty strut channel structures to concrete or steel, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Post base connector for anchoring light-duty strut channel structures to concrete or steel, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring 3D, heavy-duty MT-90 girder structures to concrete, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring 3D, heavy-duty MT-100 girder structures to concrete, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring strut channel structures under 3D loading to concrete and steel, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring strut channel structures under 3D loading to concrete and steel, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Base connector for anchoring MT-70 and MT-80 girder structures to concrete and steel, for outdoor use with low pollution
- Material composition
- Q355 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- PC software for transferring anchor/fastener setting data and updating the SI-AT-A22 Adaptive Torque module via USB cable
No technical data available
- Description
- Structural engineering anchor design software with codes and approvals, Component Based Finite Element Method calculations and a variety of fastening methods
- Codes and approvals
- Supports many country-specific design methods, and can generate detailed design reports to easily verify compliance.
- Training and support
- No matter if you are a newcomer or an expert, we offer technical training and demonstrations (face-to-face and online) to guarantee you can exploit the full potential of the software.
- Compatible with
- Internet browsers like Chrome, Edge, Firefox and others (cloud-based software)
- Description
- Adjustable brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- 45-degree angle brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete, for outdoor use with low pollution
- Material composition
- Q235 or better steel
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- SDS-plus (TE-C) setting tool for drop-in anchors
No technical data available
- Description
- Inspection gauge for checking HSU-R stone undercut anchor drill hole geometry
No technical data available
- Description
- Vacuum pumps for fastening diamond drilling systems without need for drilling and anchoring
- For use with
- DD 120, DD 150-U, DD 160, DD 200, DD 250, DD 250-CA, DD 30-W, DD 350-CA, DD 500-CA, DD 750-HY
- Rated input power
- 500 W
- Hose length
- 3000 mm
- Description
- Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
- Description
- Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
- Description
- Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
- Description
- Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
- Description
- Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
- Description
- Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
- Description
- Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
- Description
- Cheque gauge for screw anchors reusability verification in temporary fixings (HUS4, HUS3, HUS2) to attach to SIW impact wrench
- Material, corrosion
- Carbon steel
- Head configuration
- n/a
- PROFIS software
- No
- Description
- Cheque gauge for screw anchors reusability verification in temporary fixings (HUS4, HUS3, HUS2) to attach to SIW impact wrench
- Material, corrosion
- Carbon steel
- Head configuration
- n/a
- PROFIS software
- No
- Description
- Cheque gauge for screw anchors reusability verification in temporary fixings (HUS4, HUS3, HUS2) to attach to SIW impact wrench
- Material, corrosion
- Carbon steel
- Head configuration
- n/a
- PROFIS software
- No
- Description
- Cheque gauge for screw anchors reusability verification in temporary fixings (HUS4, HUS3, HUS2) to attach to SIW impact wrench
- Material, corrosion
- Carbon steel
- Head configuration
- n/a
- PROFIS software
- No
- Description
- Self-drilling metal plasterboard fixings for faster, more reliable and more economical fastening to plasterboard
- Environmental conditions
- Indoor, dry conditions
- Material composition
- Zinc, die-cast
- Type of fastening (global)
- Pre-fastening
- Description
- Universal plastic wall plugs for light-duty fastening to hollow and solid walls
- Base materials
- Concrete (aerated), Concrete (hollow core), Concrete (hollow deck), Concrete (lightweight), Concrete (uncracked), Concrete (uncracked), Drywall, Masonry (hollow), Masonry (hollow concrete block), Masonry (solid), Sand-lime block, Some types of natural stone
- Head configuration
- n/a
- Approvals / test reports
- N/A